臨邊防護欄使用要求有哪些?
來源:http://gdhuangxin.com/ 發布時間:2021-11-15
一、臨邊防護欄需采用工具化和定型化,規格尺寸以及連接方式應符合相關要求。
1、 The edge guard shall be tooled and shaped, and the specification, size and connection mode shall meet relevant requirements.
二、防護欄由上下橫桿、邊框以及內豎管或網片焊接而成,上桿離地1.1-1.2m,下桿離地0.5-0.6m,當橫桿長度達到2m以上時,需要加設專用立柱。
2、 The protective fence is welded by upper and lower cross bars, frames and inner vertical pipes or nets. The upper bar is 1.1-1.2m above the ground and the lower bar is 0.5-0.6m above the ground. When the length of the cross bar reaches more than 2m, special columns need to be added.
三、防護欄需自上而下加設密網封閉,在欄桿下部應設置高度18cm以上的擋腳板,擋腳板刷紅白或黑黃相間的條形警示漆。
3、 The protective fence shall be closed with a safety dense net from top to bottom. A toe board with a height of more than 18cm shall be set at the lower part of the railing, and the toe board shall be painted with red, white or black and yellow strip warning paint.
四、防護欄安裝固定需牢固,欄面與橫桿的連接應能承受來自任何方向1000N的外力沖擊。
4、 The protective fence shall be firmly installed and fixed, and the connection between the fence surface and the cross bar shall be able to withstand the impact of 1000N external force from any direction.
五、在接料平臺兩側使用時,需自上而下加掛密網。
5、 When used on both sides of the receiving platform, a safety dense net shall be hung from top to bottom.
六、當臨邊護欄使用在街道附近時,除防護欄桿外,敞口立面還需滿掛密網作全封閉處理。
6、 When the edge guardrail is used near the street, in addition to the protective guardrail, the open facade needs to be fully hung with safety dense net for full sealing treatment.
今天的分享就是關于臨邊護欄,更多的內容小編會不斷的再此分享,更多的內容請繼續關注我們:http://gdhuangxin.com
Today's sharing is about the edge fence. More content will be shared here. Please continue to pay attention to us: http://gdhuangxin.com
- 上一篇:工地彩鋼圍擋施工要注意什么?
- 下一篇:了解臨邊護欄的用處以及它的標準